UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM SD
SPECIALIZED DISCLOSURE REPORT
SYNAPTICS INCORPORATED
(Exact name of registrant as specified in its charter)
DELAWARE | 000-49602 | 77-0118518 | ||
(State or other jurisdiction of incorporation) |
(Commission File Number) |
(I.R.S. Employer Identification No.) |
1251 McKay Drive
San Jose, California 95131
(Address of principal executive offices, including zip code)
(408) 904-1100
(Name and telephone number, including area code, of the person to contact in connection with this report)
Check the appropriate box to indicate the rule pursuant to which this form is being filed, and provide the period to which the information in this form applies:
☒ | Rule 13p-1 under the Securities Exchange Act (17 CFR 240.13p-1) for the reporting period from January 1 to December 31, 2017. |
Section 1 Conflict Minerals Disclosure
Item 1.01. Conflict Minerals Disclosure and Report.
Conflict Minerals Disclosure
Synaptics Incorporated (including its consolidated subsidiaries, the Registrant) is filing this Form SD pursuant to Rule 13p-1 under the Securities Exchange Act of 1934 for the reporting period from January 1, 2017 to December 31, 2017 (the Reporting Period).
For the Reporting Period, the Registrant conducted, in good faith, a reasonable country of origin inquiry regarding the conflict minerals that are necessary to the functionality or production of products that the Registrant manufactures or contracts to manufacture (the Minerals). The inquiry was reasonably designed to determine if the Minerals originated in the Democratic Republic of the Congo or an adjoining country or are from recycled or scrap sources.
The Registrant has determined that it is required to file a Conflict Minerals Report, which is attached as Exhibit 1.01 to this report. The Conflict Minerals Report is also publicly available at https://www.synaptics.com/conflict-minerals. The content on, or accessible through, any website referred to in this Form SD is not incorporated by reference into this Form SD unless expressly noted.
Item 1.02. Exhibit.
The Registrants Conflict Minerals Report is included as Exhibit 1.01 to this report.
Section 2 Exhibits
Item 2.01. Exhibits.
Exhibit Number |
Description | |
1.01 | Conflict Minerals Report as required by Items 1.01 and 1.02 of this Form. |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
Synaptics Incorporated | ||
By: /s/ Alex Wong | ||
Alex Wong | ||
Senior Vice President of Worldwide Operations | ||
May 31, 2018 |
EXHIBIT 1.01
CONFLICT MINERALS REPORT
This Conflict Minerals Report (Report) of Synaptics Incorporated and its consolidated subsidiaries (Synaptics, the Registrant or we) for the year ended December 31, 2017 (the Reporting Period), is presented to comply with Rule 13p-1 under the Securities Exchange Act of 1934 (the Rule), the instructions to Form SD, and the Public Statement on the Effect of the Recent Court of Appeals Decision on the Conflict Minerals Rule issued by the Director of the Division of Corporation Finance of the Securities and Exchange Commission on April 29, 2014. Please refer to the Rule, Form SD, and the Securities and Exchange Commissions (SEC) Release No. 34-67716 issued by the SEC on August 22, 2012 for definitions to the terms used in this Report, unless otherwise defined herein. Note that in accordance with Instruction 3 to Item 1.01 of Form SD, this Report does not include information regarding certain companies and assets that we acquired during calendar year 2017 and that were not previously obligated to provide a specialized disclosure report with respect to conflict minerals.
Synaptics is a leading worldwide developer and supplier of custom-designed human interface product solutions that enable people to interact more easily and intuitively with a wide variety of mobile computing, communications, entertainment, and other electronic devices. Synaptics currently generates revenue from the markets for smartphones, tablets, personal computer, or PC, products, primarily notebook computers, Internet of Things, or IoT, which includes devices with voice, speech and video within smart homes and other select electronic devices, including devices in automobiles, with our customized human interface solutions. Every solution we deliver either contains or consists of our touch-, display driver- or fingerprint authentication-based-, voice and speech-, and video-semiconductor solutions, which includes our chip, customer-specific firmware, and software. We generally supply our human interface product solutions to our original equipment manufacturer (OEM) customers through their contract manufacturers, which take delivery of our products and pay us directly for such products.
Synaptics does not engage in the actual mining of conflict minerals (the Minerals), does not make purchases of raw ore or unrefined Minerals from mines, and is many steps removed in the supply chain from the mining of the Minerals. We purchase the materials used in our products from a large network of suppliers, who may contribute necessary Minerals to our products. The smelters and refiners used by our suppliers are in the best position in the total supply chain to know the origin of ores, which cannot be determined with any certainty once the ores are smelted, refined and converted to ingots, bullions or other Minerals-containing derivatives. We rely on our suppliers to assist with our due diligence efforts, including our suppliers self-identification of the smelters and refiners used in their supply chain, and the countries from which the Minerals used in their supply chain may originate.
I. Products
The following products were identified during the Reporting Period as products that may contain conflict minerals necessary to the functionality or production of products manufactured, or contracted to manufacture, by Synaptics:
| Our personal computer, or PC, solutions, include our TouchPadTM, ClickPadTM, ForcePadTM, Dual Pointing Solutions, and TouchStykTM product lines, which are touch-sensitive pads and other interfaces that sense the position, movement, force, or a combination thereof, applied by one or more fingers on its surface through the measurement of capacitance. We typically sell our PC solutions as a module to the contract manufacturers of OEMs for assembly into notebook computers or other PC products. |
| Our mobile solutions include our ClearPadTM product line, designed for clear, capacitive touchscreen solutions that enable the user to interact directly with the display on electronic devices, such as mobile smartphones, tablets, and automobiles, and our family of ClearViewTM Liquid Crystal Display (LCD) and Organic Light Emitting Diode (OLED) display drivers. We typically sell our ClearPad products as a chip, together with customer-specific firmware, to sensor manufacturers or OLED or LCD manufacturers to integrate into their touch-enabled products. A discrete touchscreen product typically consists of a transparent, thin capacitive sensor that can be placed over any display, such as an LCD or OLED and combined with a flexible circuit material and a touch controller chip. A display integrated touchscreen product typically consists of a capacitive touch sensor embedded into the LCD panel, combined with a flexible circuit material and a touch controller chip. |
| Our ClearViewTM display driver products offer advanced image processing and low power technology for displays on electronic devices, including smartphones and tablets. The adaptive image processing works in concert with proprietary customization options enabling development of efficient and cost-effective high-performance solutions and faster time to market. |
| Our TouchViewTM products integrate touch and display technologies to deliver advanced performance and simplified design. Our proprietary algorithms synchronize touch sensing with display driving, effectively eliminating display-induced noise and improving capacitive sensing performance. TouchView is available in two-chip and single-chip (Touch and Display Driver Integration (TDDI)) configurations; both configurations reduce manufacturing complexity and simplify the supply chain for OEM manufacturers. |
| Our Fingerprint Identification products are used in both mobile and PC products. Our Natural IDTM products for mobile and SecurePadTM product for PC use capacitive imaging technology, while our Clear ID products are typically integrated into the display. Our technology uses sophisticated digital image processing to unlock devices and access online services such as retail, banking, and social media portals. We typically sell our fingerprint solutions to the module manufacturers of OEMs or directly to the OEM for assembly into mobile or PC products. |
II. Due Diligence
Based on the OECD Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas (Third Edition OECD 2016) and the due diligence framework published by the Responsible Business Alliance (formerly the Electronic Industry Citizenship Coalition) (RBA) and the Global e-Sustainability Initiative (GeSI), including the Responsible Minerals Initiatives (RMI) Conflict Minerals Reporting Template for calendar year 2017 (the Template), we took the following measures, during the Reporting Period, to determine the source and chain of custody for the Minerals which we believed necessary to the functionality or production of products manufactured, or contracted to be manufactured, by us in the Reporting Period.
1. | Synaptics identified 79 suppliers, whom we believed could provide materials containing the Minerals necessary to the functionality or production of products manufactured by us, or contracted by us to be manufactured. |
2. | Synaptics sent out a Conflict Minerals survey, based on the Template, to the suppliers described in No. 1 above requesting them to (a) determine whether they supplied Synaptics with metals or materials containing the Minerals; (b) conduct independent due diligence on their own supply chain; (c) using RMI resources, identify all smelters in their supply chain that supply products containing the Minerals to Synaptics; and (d) download, complete and return the Template to Synaptics identifying all smelters and determining whether such smelters were certified as conflict-free by the RMIs Third Party Audit program, now known as the Responsible Minerals Assurance Program (RMAP). For any non-conflict free certified smelters identified, Synaptics strongly recommended the supplier remove such non-conflict free certified smelters from the suppliers supply chain and required the supplier to submit a plan to Synaptics detailing its efforts to remove or replace the non-conflict free certified smelter. In addition, Synaptics suppliers were required to establish and document a policy on conflict minerals. |
3. | All suppliers identified in No. 1 above completed the steps described in No. 2 above. 23 suppliers declared that their products did not contain any conflict minerals. Of the 56 suppliers who stated their products may contain conflict minerals, approximately 70% stated gold may be in the products supplied to Synaptics; approximately 77% stated tin may be in the products supplied to Synaptics; approximately 20% stated tantalum may be in the products supplied to Synaptics; and approximately 36% stated tungsten may be in the products supplied to Synaptics. |
4. | All of the suppliers who responded identified all smelters used in their supply chain in accordance with the Template and its instructions and of the suppliers that stated their products may contain conflict minerals, 89% certified that the metals or materials they supplied to Synaptics were conflict-free Minerals. The six suppliers who could not certify that 100% of their smelters were conflict-free sourced from a combined 245 different smelters, of which only two smelters were listed as non-conflict free smelters by the RMI1. |
5. | Synaptics compared the smelters identified by each of our suppliers to the list of smelters identified as conflict-free or Active by RMI. 99% of the smelters used by our suppliers appeared on this list and are certified by the RMI as conflict-free smelters. Based on the information provided by our suppliers, Synaptics believes that the facilities used to process the Minerals contained in Synaptics products include the smelters listed in Exhibit A below. |
6. a. | Our suppliers used approximately 39 different smelters located in 12 different countries for tantalum. These countries include Brazil, China, Estonia, Germany, India, Japan, Kazakhstan, Macedonia, Mexico, Russian Federation, Thailand and the United States of America. Of these smelters, 97% are certified conflict-free smelters as defined by the RMI. |
b. | Our suppliers used approximately 95 different smelters located in 30 different countries for gold. These countries include Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, India, Indonesia, Italy, Japan, Kazakhstan, Kyrgyzstan, Mexico, Netherlands, Philippines, Russian Federation, Singapore, South Africa, South Korea, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey, the United Arab Emirates, the United States of America, and Uzbekistan. Of these smelters, 99% are certified conflict-free smelters as defined by the RMI. |
c. | Our suppliers used approximately 70 different smelters located in 14 different countries for tin. These countries include Belgium, Bolivia, Brazil, China, Indonesia, Japan, Malaysia, Peru, Philippines, Poland, Spain, Taiwan, Thailand, and the United States of America. Of these smelters, 100% are certified conflict-free smelters as defined by the RMI. |
d. | Our suppliers used approximately 41 different smelters located in 10 different countries for tungsten. These countries include Austria, Brazil, China, Germany, Japan, Philippines, Russian Federation, South Korea, the United States of America, and Vietnam. Of these smelters, 100% are certified conflict-free smelters as defined by the RMI. |
1 | Smelter data presented in this Report is based on the Responsible Minerals Assurance Program list of Conformant Smelters and Refiners as of April 22, 2018. |
7. | Synaptics reasonable country of origin inquiry is based on surveys provided by its suppliers, which report on the conflict-free status of their smelters. Certain of Synaptics suppliers were unable to determine the countries of origin of the Minerals it provided to us, therefore, we are unable, at this time, to conclusively determine the countries of origin of all the Minerals used in our products. |
During the Reporting Period, we conducted the due diligence efforts described in this Report to determine the mine or location of the Minerals in our products. We relied on the information provided by independent third party audit programs, such as the RMI, to determine whether the smelters disclosed by our suppliers had been conflict-free certified or were Active smelters who had committed to undergo a Responsible Minerals Assurance Process assessment, according to the RMIs standards.
We continue to recommend to, and put pressure on, our suppliers who had non-conflict free certified smelters in their supply chain in calendar year 2017 to remove such non-conflict free certified smelters from their supply chain as soon as possible and we require such suppliers to submit a plan to Synaptics detailing their efforts to either remove or replace such smelter. We also have an audit plan in place, which was created to audit the design, performance and effectiveness of our due diligence framework and due diligence measures as they relate to the Minerals.
As discussed above, where possible, Synaptics has relied on third party assurances and certifications. For example, we accept as reliable any smelter that is a member of the RMI program. To the extent that other audited supplier certifications are provided to Synaptics, Synaptics may consider reliance on such certifications on a case-by-case basis.
III. Additional Due Diligence and Risk Mitigation
We will continue to monitor our supply chain, including smelters used by our suppliers, to ensure that all smelters used by our suppliers continue to remain conflict-free. We will continue to monitor and pressure our supply chain to provide complete and accurate information regarding their smelters who provide the Minerals; continue to pressure our supply chain to either remove or replace non-conflict free certified smelters from their own supply chain; remove from our supply chain those suppliers who continually refuse to or who are unable to provide complete information regarding their smelters; remove from our supply chain those suppliers who continue to maintain non-conflict free certified smelters in their supply chain; and audit the results of supplier responses to the Template, including potential site visits to our supplier locations around the world, as required.
Due to the size, breadth and complexity of our supply chain, the process of successfully tracing all of the necessary Minerals used in our products back to their country of origin will require additional time and resources. Our ability to make determinations about the presence and source of origin of such Minerals in our products depends upon a number of factors including, but not limited to: (i) the respective due diligence efforts of our suppliers and their supply chain, as well as their willingness to
disclose such information to us, and (ii) the ability and willingness of our supply chain to adopt the OECD Guidance and other initiatives or guidance that may develop over time with respect to responsible sourcing. The inability to obtain reliable information from any level of our supply chain could have a material impact on our ability to provide meaningful information on the presence and origin of necessary Minerals in our products supply chain with any reasonable degree of certainty. There can be no assurance that our suppliers will continue to cooperate with our diligence inquiries and our requests for certifications, or to provide us with the documentation or other evidence that we consider reliable in a timeframe sufficient to allow us to make a reasonable and reliable assessment following appropriate further diligence measures, as may be required.
Exhibit A
Smelters reported in Synaptics Supply Chain as of December 31, 2017:
Smelter Name |
Smelter Country | |
A.L.M.T. TUNGSTEN Corp. | Japan | |
ACL Metais Eireli | Brazil | |
Advanced Chemical Company | United States | |
Aida Chemical Industries Co., Ltd. | Japan | |
Al Etihad Gold LLC | United Arab Emirates | |
Allgemeine Gold-und Silberscheideanstalt A.G. | Germany | |
Almalyk Mining and Metallurgical Complex (AMMC) | Uzbekistan | |
Alpha | United States | |
AngloGold Ashanti Corrego do Sitio Mineracao | Brazil | |
Argor-Heraeus S.A. | Switzerland | |
Asahi Pretec Corp. | Japan | |
Asahi Refining Canada Ltd. | Canada | |
Asahi Refining USA Inc. | United States | |
Asaka Riken Co., Ltd. | Japan | |
Asia Tungsten Products Vietnam Ltd. | Vietnam | |
AU Traders and Refiners | South Africa | |
Aurubis AG | Germany | |
Bangko Sentral ng Pilipinas (Central Bank of the Philippines) | Philippines | |
Boliden AB | Sweden | |
C. Hafner GmbH + Co. KG | Germany | |
CCR Refinery - Glencore Canada Corporation | Canada | |
Cendres + Metaux S.A. | Switzerland | |
Changsha South Tantalum Niobium Co., Ltd. | China | |
Chenzhou Diamond Tungsten Products Co., Ltd. | China | |
Chenzhou Yunxiang Mining and Metallurgy Co., Ltd. | China | |
Chimet S.p.A. | Italy | |
China Tin Group Co., Ltd. | China | |
Chongyi Zhangyuan Tungsten Co., Ltd. | China | |
Conghua Tantalum and Niobium Smeltry | China | |
CV Ayi Jaya | Indonesia | |
CV Dua Sekawan | Indonesia | |
CV Gita Pesona | Indonesia | |
CV Serumpun Sebalai | Indonesia | |
CV Tiga Sekawan | Indonesia | |
CV United Smelting | Indonesia |
CV Venus Inti Perkasa | Indonesia | |
D Block Metals, LLC | United States | |
Daejin Indus Co., Ltd. | South Korea | |
DODUCO Contacts and Refining GmbH | Germany | |
Dowa | Japan | |
Dowa | Japan | |
DSC (Do Sung Corporation) | South Korea | |
Eco-System Recycling Co., Ltd. | Japan | |
EM Vinto | Bolivia | |
Emirates Gold DMCC | United Arab Emirates | |
Exotech Inc. | United States | |
F&X Electro-Materials Ltd. | China | |
Fenix Metals | Poland | |
FIR Metals & Resource Ltd. | China | |
Fujian Jinxin Tungsten Co., Ltd. | China | |
Ganzhou Huaxing Tungsten Products Co., Ltd. | China | |
Ganzhou Jiangwu Ferrotungsten Co., Ltd. | China | |
Ganzhou Seadragon W & Mo Co., Ltd. | China | |
Geib Refining Corporation | United States | |
Gejiu Fengming Metallurgy Chemical Plant | China | |
Gejiu Jinye Mineral Company | China | |
Gejiu Kai Meng Industry and Trade LLC | China | |
Gejiu Non-Ferrous Metal Processing Co., Ltd. | China | |
Gejiu Yunxin Nonferrous Electrolysis Co., Ltd. | China | |
Global Advanced Metals Aizu | Japan | |
Global Advanced Metals Boyertown | United States | |
Global Tungsten & Powders Corp. | United States | |
Gold Refinery of Zijin Mining Group Co., Ltd. | China | |
Guangdong Hanhe Non-Ferrous Metal Co., Ltd. | China | |
Guangdong Xianglu Tungsten Co., Ltd. | China | |
Guangdong Zhiyuan New Material Co., Ltd. | China | |
Guanyang Guida Nonferrous Metal Smelting Plant | China | |
H.C. Starck Co., Ltd. | Thailand | |
H.C. Starck Hermsdorf GmbH | Germany | |
H.C. Starck Inc. | United States | |
H.C. Starck Ltd. | Japan | |
H.C. Starck Smelting GmbH & Co. KG | Germany | |
H.C. Starck Smelting GmbH & Co. KG | Germany | |
H.C. Starck Tantalum and Niobium GmbH | Germany | |
H.C. Starck Tungsten GmbH | Germany | |
Heimerle + Meule GmbH | Germany |
Hengyang King Xing Lifeng New Materials Co., Ltd. | China | |
Heraeus Ltd. Hong Kong | China | |
Heraeus Precious Metals GmbH & Co. KG | Germany | |
HuiChang Hill Tin Industry Co., Ltd. | China | |
Huichang Jinshunda Tin Co., Ltd. | China | |
Hunan Chenzhou Mining Co., Ltd. | China | |
Hunan Chuangda Vanadium Tungsten Co., Ltd. Wuji | China | |
Hunan Chunchang Nonferrous Metals Co., Ltd. | China | |
Hydrometallurg, JSC | Russian Federation | |
Inner Mongolia Qiankun Gold and Silver Refinery Share Co., Ltd. | China | |
Ishifuku Metal Industry Co., Ltd. | Japan | |
Istanbul Gold Refinery | Turkey | |
Japan Mint | Japan | |
Japan New Metals Co., Ltd. | Japan | |
Jiangwu H.C. Starck Tungsten Products Co., Ltd. | China | |
Jiangxi Copper Co., Ltd. | China | |
Jiangxi Dinghai Tantalum & Niobium Co., Ltd. | China | |
Jiangxi Gan Bei Tungsten Co., Ltd. | China | |
Jiangxi Ketai Advanced Material Co., Ltd. | China | |
Jiangxi Tonggu Non-ferrous Metallurgical & Chemical Co., Ltd. | China | |
Jiangxi Tuohong New Raw Material | China | |
Jiangxi Xinsheng Tungsten Industry Co., Ltd. | China | |
Jiangxi Xiushui Xianggan Nonferrous Metals Co., Ltd. | China | |
Jiangxi Yaosheng Tungsten Co., Ltd. | China | |
JiuJiang JinXin Nonferrous Metals Co., Ltd. | China | |
Jiujiang Nonferrous Metals Smelting Company Limited | China | |
Jiujiang Zhongao Tantalum & Niobium Co., Ltd. | China | |
JSC Ekaterinburg Non-Ferrous Metal Processing Plant | Russian Federation | |
JSC Uralelectromed | Russian Federation | |
JX Nippon Mining & Metals Co., Ltd. | Japan | |
Kazzinc | Kazakhstan | |
KEMET Blue Metals | Mexico | |
KEMET Blue Powder | United States | |
Kennametal Fallon | United States | |
Kennametal Huntsville | United States | |
Kennecott Utah Copper LLC | United States | |
Kojima Chemicals Co., Ltd. | Japan |
Korea Zinc Co., Ltd. | South Korea | |
Kyrgyzaltyn JSC | Kyrgyzstan | |
LSM Brasil S.A. | Brazil | |
LS-NIKKO Copper Inc. | South Korea | |
Magnus Minerais Metais e Ligas Ltda. | Brazil | |
Malaysia Smelting Corporation (MSC) | Malaysia | |
Malipo Haiyu Tungsten Co., Ltd. | China | |
Materion | United States | |
Matsuda Sangyo Co., Ltd. | Japan | |
Melt Metais e Ligas S.A. | Brazil | |
Metallic Resources, Inc. | United States | |
Metallo Belgium N.V. | Belgium | |
Metallo Spain S.L.U. | Spain | |
Metallurgical Products India Pvt., Ltd. | India | |
Metalor Technologies (Hong Kong) Ltd. | China | |
Metalor Technologies (Singapore) Pte., Ltd. | Singapore | |
Metalor Technologies (Suzhou) Ltd. | China | |
Metalor Technologies S.A. | Switzerland | |
Metalor USA Refining Corporation | United States | |
Metalurgica Met-Mex Penoles S.A. De C.V. | Mexico | |
Mineracao Taboca S.A. | Brazil | |
Mineracao Taboca S.A. | Brazil | |
Minsur | Peru | |
Mitsubishi Materials Corporation | Japan | |
Mitsubishi Materials Corporation | Japan | |
Mitsui Mining and Smelting Co., Ltd. | Japan | |
Mitsui Mining and Smelting Co., Ltd. | Japan | |
MMTC-PAMP India Pvt., Ltd. | India | |
Moliren Ltd. | Russian Federation | |
Moscow Special Alloys Processing Plant | Russian Federation | |
Nadir Metal Rafineri San. Ve Tic. A.S. | Turkey | |
Nankang Nanshan Tin Manufactory Co., Ltd. | China | |
Niagara Refining LLC | United States | |
Nihon Material Co., Ltd. | Japan | |
Ningxia Orient Tantalum Industry Co., Ltd. | China | |
NPM Silmet AS | Estonia | |
Nui Phao H.C. Starck Tungsten Chemicals Manufacturing LLC | Vietnam | |
O.M. Manufacturing (Thailand) Co., Ltd. | Thailand | |
O.M. Manufacturing Philippines, Inc. | Philippines | |
Ogussa Osterreichische Gold- und Silber-Scheideanstalt GmbH | Austria |
Ohura Precious Metal Industry Co., Ltd. | Japan | |
OJSC The Gulidov Krasnoyarsk Non-Ferrous Metals Plant (OJSC Krastsvetmet) | Russian Federation | |
OJSC Novosibirsk Refinery | Russian Federation | |
Operaciones Metalurgical S.A. | Bolivia | |
PAMP S.A. | Switzerland | |
Philippine Chuangxin Industrial Co., Inc. | Philippines | |
Power Resources Ltd. | Macedonia | |
Prioksky Plant of Non-Ferrous Metals | Russian Federation | |
PT Aneka Tambang (Persero) Tbk | Indonesia | |
PT Aries Kencana Sejahtera | Indonesia | |
PT Artha Cipta Langgeng | Indonesia | |
PT ATD Makmur Mandiri Jaya | Indonesia | |
PT Babel Inti Perkasa | Indonesia | |
PT Bangka Prima Tin | Indonesia | |
PT Bangka Tin Industry | Indonesia | |
PT Belitung Industri Sejahtera | Indonesia | |
PT Bukit Timah | Indonesia | |
PT DS Jaya Abadi | Indonesia | |
PT Eunindo Usaha Mandiri | Indonesia | |
PT Inti Stania Prima | Indonesia | |
PT Karimun Mining | Indonesia | |
PT Kijang Jaya Mandiri | Indonesia | |
PT Lautan Harmonis Sejahtera | Indonesia | |
PT Menara Cipta Mulia | Indonesia | |
PT Mitra Stania Prima | Indonesia | |
PT Panca Mega Persada | Indonesia | |
PT Prima Timah Utama | Indonesia | |
PT Refined Bangka Tin | Indonesia | |
PT Sariwiguna Binasentosa | Indonesia | |
PT Stanindo Inti Perkasa | Indonesia | |
PT Sukses Inti Makmur | Indonesia | |
PT Sumber Jaya Indah | Indonesia | |
PT Timah (Persero) Tbk Kundur | Indonesia | |
PT Timah (Persero) Tbk Mentok | Indonesia | |
PT Tinindo Inter Nusa | Indonesia | |
PT Tommy Utama | Indonesia | |
PX Precinox S.A. | Switzerland | |
QuantumClean | United States | |
Rand Refinery (Pty) Ltd. | South Africa | |
Republic Metals Corporation | United States |
Resind Industria e Comercio Ltda. | Brazil | |
RFH Tantalum Smeltery Co., Ltd./Yanling Jincheng Tantalum & Niobium Co., Ltd. | China | |
Royal Canadian Mint | Canada | |
Rui Da Hung | Taiwan | |
SAAMP | France | |
Samduck Precious Metals | South Korea | |
SAXONIA Edelmetalle GmbH | Germany | |
Schone Edelmetaal B.V. | Netherlands | |
SEMPSA Joyeria Plateria S.A. | Spain | |
Shandong Zhaojin Gold & Silver Refinery Co., Ltd. | China | |
Sichuan Tianze Precious Metals Co., Ltd. | China | |
Singway Technology Co., Ltd. | Taiwan | |
SOE Shyolkovsky Factory of Secondary Precious Metals | Russian Federation | |
Soft Metais Ltda. | Brazil | |
Solar Applied Materials Technology Corp. | Taiwan | |
Solikamsk Magnesium Works OAO | Russian Federation | |
South-East Nonferrous Metal Company Limited of Hengyang City | China | |
Sumitomo Metal Mining Co., Ltd. | Japan | |
T.C.A S.p.A | Italy | |
Taki Chemical Co., Ltd. | Japan | |
Tanaka Kikinzoku Kogyo K.K. | Japan | |
Tejing (Vietnam) Tungsten Co., Ltd. | Vietnam | |
Telex Metals | United States | |
Thaisarco | Thailand | |
The Refinery of Shandong Gold Mining Co., Ltd. | China | |
Tokuriki Honten Co., Ltd. | Japan | |
Torecom | South Korea | |
Ulba Metallurgical Plant JSC | Kazakhstan | |
Umicore Brasil Ltda. | Brazil | |
Umicore Precious Metals Thailand | Thailand | |
Umicore S.A. Business Unit Precious Metals Refining | Belgium | |
Unecha Refractory metals plant | Russian Federation | |
United Precious Metal Refining, Inc. | United States | |
Valcambi S.A. | Switzerland | |
Vietnam Youngsun Tungsten Industry Co., Ltd. | Vietnam | |
Western Australian Mint (T/a The Perth Mint) | Australia | |
White Solder Metalurgia e Mineracao Ltda. | Brazil | |
WIELAND Edelmetalle GmbH | Germany |
Wolfram Bergbau und Hutten AG | Austria | |
Woltech Korea Co., Ltd. | South Korea | |
Xiamen Tungsten (H.C.) Co., Ltd. | China | |
Xiamen Tungsten Co., Ltd. | China | |
Xinfeng Huarui Tungsten & Molybdenum New Material Co., Ltd. | China | |
Xinhai Rendan Shaoguan Tungsten Co., Ltd. | China | |
XinXing HaoRong Electronic Material Co., Ltd. | China | |
Yamamoto Precious Metal Co., Ltd. | Japan | |
Yichun Jin Yang Rare Metal Co., Ltd. | China | |
Yokohama Metal Co., Ltd. | Japan | |
Yunnan Chengfeng Non-ferrous Metals Co., Ltd. | China | |
Yunnan Tin Company Limited | China | |
Zhongyuan Gold Smelter of Zhongjin Gold Corporation | China | |
Zhuzhou Cemented Carbide Group Co., Ltd. | China |
This website contains forward-looking statements that are subject to the safe harbors created under the Securities Act of 1933, as amended, and the Securities Exchange Act of 1934, as amended. Forward-looking statements give our current expectations and projections relating to our financial condition, results of operations, plans, objectives, future performance and business, and can be identified by the fact that they do not relate strictly to historical or current facts. Such forward-looking statements may include words such as "expect," "anticipate," "intend," "believe," "estimate," "plan," "target," "strategy," "continue," "may," "will," "should," variations of such words, or other words and terms of similar meaning. All forward-looking statements reflect our best judgment and are based on several factors relating to our operations and business environment, all of which are difficult to predict and many of which are beyond our control. Such factors include, but are not limited to, the risks as identified in the "Risk Factors," "Management's Discussion and Analysis of Financial Condition and Results of Operations" and "Business" sections of our Annual Report on Form 10-K for our most recent fiscal year, and other risks as identified from time to time in our Securities and Exchange Commission reports. Forward-looking statements are based on information available to us on the date hereof, and we do not have, and expressly disclaim, any obligation to publicly release any updates or any changes in our expectations, or any change in events, conditions, or circumstances on which any forward-looking statement is based. Our actual results and the timing of certain events could differ materially from the forward-looking statements. These forward-looking statements do not reflect the potential impact of any mergers, acquisitions, or other business combinations that had not been completed as of the date of this filing.